Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== How To Setup OctoPi ====== OctoPrint is a really cool piece of software that allows you to control your 3D printer from your web browser. It is awesome for two main reasons: * It can run on low-powered hardware (e.g. a Raspberry Pi). * It's FOSS. There are some other solutions to achieve this goal, but OctoPrint is simple to setup. Especially so with OctoPi, which is a pre-made Raspberry Pi image that has the OctoPrint server configured. <TO DO> wiki/3d_printing/octopi_setup.txt Last modified: 2025/09/01 23:52by Greg
Greg